This document outlines construction techniques for military fighting positions tailored to specific weapons:
Machine Gun Positions
- Dig a trench that is 30cm deep and 1m wide, creating a fighting pit.
- Construct overhead cover using a 30cm thick earth berm to protect against enemy fire.
- Include a 50cm deep grenade sump 2m behind the fighting pit to prevent grenade damage.
- Add a 1m wide access trench connecting to the main position for safe movement.
- Install a 30cm deep ammunition storage compartment 1m from the fighting pit to keep ammunition safe and accessible.
Dragon Position
- Create a 45cm deep fighting pit with a 1.2m wide entrance.
- Build a 45cm thick berm for overhead cover to shield against enemy fire.
- Include a 60cm deep grenade sump 2.5m behind the position to mitigate grenade threats.
- Add a 1.5m wide access trench with a 90cm radius curve to deflect blast waves.
- Install a 40cm deep fuel storage compartment 1.5m from the fighting pit to safely store fuel.
Recoilless Rifle Positions
- Construct a 50cm deep fighting pit with a 1.5m wide entrance.
- Build a 50cm thick berm with a 1m wide firing slit for accurate shooting.
- Include a 70cm deep grenade sump 3m behind the position to protect against grenades.
- Add a 2m wide access trench with a 1.2m radius curve to reduce blast impact.
- Install a 50cm deep ammunition storage compartment 2m from the fighting pit to securely store ammunition.
General Requirements
- All positions require 30cm thick overhead cover to provide adequate protection.
- Grenade sumps must be 50-70cm deep depending on weapon type to ensure safety.
- Access trenches should have curved sections to deflect blast waves and protect soldiers.
- Storage compartments must be at least 30cm deep to securely hold ammunition and fuel.
- Positions should be located 10-15m from the front line to maintain a safe distance from enemy fire.
Machine Gun Positions
Machine gun positions are designed for sustained fire support. The trench should be dug to a depth of 30cm and a width of 1m to create a fighting pit. Overhead cover is crucial and should be constructed using a 30cm thick earth berm. This provides essential protection against enemy fire. A grenade sump, 50cm deep and positioned 2m behind the fighting pit, helps mitigate the risk of grenade damage. An access trench, 1m wide, connects the main position to allow for safe movement. Additionally, a 30cm deep ammunition storage compartment, placed 1m from the fighting pit, ensures a steady supply of ammunition.
Dragon Position
The Dragon position is designed for the use of recoilless rifles. The fighting pit should be dug to a depth of 45cm and have a wide entrance of 1.2m. Overhead cover is provided by a 45cm thick berm, which protects against enemy fire. A grenade sump, 60cm deep and located 2.5m behind the position, helps protect against grenade threats. The access trench, 1.5m wide with a 90cm radius curve, is designed to deflect blast waves. A fuel storage compartment, 40cm deep and positioned 1.5m from the fighting pit, ensures safe fuel storage.
Recoilless Rifle Positions
Recoilless rifle positions are designed for accurate shooting. The fighting pit should be dug to a depth of 50cm and have a wide entrance of 1.5m. Overhead cover is provided by a 50cm thick berm with a 1m wide firing slit for accurate shooting. A grenade sump, 70cm deep and positioned 3m behind the position, helps protect against grenade threats. The access trench, 2m wide with a 1.2m radius curve, is designed to reduce blast impact. An ammunition storage compartment, 50cm deep and positioned 2m from the fighting pit, ensures safe ammunition storage.
General Requirements
All fighting positions require overhead cover that is at least 30cm thick to provide adequate protection against enemy fire. Grenade sumps should be 50-70cm deep depending on the weapon type to ensure safety. Access trenches should have curved sections to deflect blast waves and protect soldiers. Storage compartments must be at least 30cm deep to securely hold ammunition and fuel. Positions should be located 10-15m from the front line to maintain a safe distance from enemy fire.
Common Mistakes
- Not digging the fighting pit deep enough can leave soldiers exposed to enemy fire.
- Overhead cover that is too thin can fail to provide adequate protection.
- Neglecting to include a grenade sump can leave positions vulnerable to grenade attacks.
- Access trenches without curved sections can fail to protect against blast waves.
- Storage compartments that are too shallow can compromise the safety of ammunition and fuel.
Practical Tips
- Always ensure that overhead cover is thick enough to provide adequate protection.
- Include grenade sumps to protect against grenade threats.
- Design access trenches with curved sections to protect against blast waves.
- Position storage compartments at a safe distance from the fighting pit to ensure safety.
- Maintain a safe distance from the front line to protect against enemy fire.
Getting Started
Begin by assessing the terrain and determining the best location for your fighting positions. Ensure that positions are located 10-15m from the front line. Dig the fighting pit to the required depth and width. Construct overhead cover using the specified thickness of earth. Include a grenade sump and access trench as outlined. Install storage compartments for ammunition and fuel. Regularly inspect positions to ensure they remain safe and effective.