Materials Required

  • 32mm PVC piping (1.5m length)
  • 32mm 90-degree bend
  • 32mm PVC Tee
  • 50x40mm Invert Level Taper
  • 65mm Coupling
  • PVC glue
  • Drop saw

Construction Steps

  1. Cut the main PVC tube at an angle for easier insertion into sand. Wear safety gear during cutting.
  2. Determine length (1/3 buried in sand). Cut to desired size.
  3. Apply PVC glue to the Tee’s interior and attach to the main tube.
  4. Insert a cut PVC segment into the Tee’s top opening. Attach a 90-degree elbow at a vertical angle to the side opening for proper beer alignment.
  5. Add a short PVC segment to the Tee’s remaining opening to form the top structure.
  6. Glue the level insert taper (40mm) to the main tube, then attach a coupling. Allow to dry.

Usage Tips

  • Angle the holder so beer compartment remains upright
  • Can be painted for durability
  • Optional upgrades: add bait holder section or cooling system

Enhancements

  • Add a second Tee for bait storage or attachments like a tackle box
  • Consider adding a cooling system for beer storage
  • Make the beer section swivel for stability
[KNOWLEDGE CONNECTIONS]
CLOSEST CONNECTIONS